Steel doors installation method

Now many people will choose to decorate the Interior Metal Doors or Exterior Steel Doors. The exterior and interior Steel Doors is a door made of Mild Steel Sheet. Therefore, the price will be cheaper than the solid wood doors, and it is a relatively mature mid-range interior/exterior door on the market. Below is the installation method of interior metal doors and exterior steel doors and the purchase of steel doors.

Steel Doors Installation Method:

1, First of all to prepare tools, such as: hammers, nails, etc., and then in the measurement, the main measurement of door openings and door size is appropriate.

2, When installing the door frame, clean the floor, otherwise the steel doors will be soiled, and then use a nail to fix the horizontal frame and the two vertical frames.

3, Fix the assembled door frame, check the work, check whether the inner corner is standard, check whether the width of the inner and outer inner space of the door frame is the same, otherwise it will affect the decoration effect.

4, After the inspection is completed, put the door frame into the door hole, the observation point and the line are not in the corresponding position, if there is no error, you can carry out fixed work.

5, Next install the door, this should pay great attention to the upper and lower hinge with a nail, and then observe whether the door gap is too large or too small, check the file door and door leaf is on a horizontal plane, whether the door leaf has a tendency to fall, everything After checking, the nails can be tightened if they meet the standard. When installing the door frame and the door leaf, it must not be misplaced, otherwise the door seam will not be tight enough!

6, After the above are installed, you can install the line, the installation of the line can be determined according to the actual situation, for example, the wall is narrower than the door frame, you can use the side of the line width side against the wall, on the contrary, you can use the line to remove both sides Covering the nail bar, nailing back the line with a nail, it's easy!

7, After the installation is complete, you can try whether the next door is flexible, if you feel the door is bulky, you can try several times, after all, this is a new door.