How to maintain the wrought iron gate?

In the selection of materials and coatings, they all strive to achieve rust-proof, wear-resistant, corrosion-resistant, and anti-exposure, so users should not try to buy some unqualified iron facilities. In order to prolong the life of outdoor Wrought Iron facilities, the following points should also be made:

1. Avoid bumps

It mainly occurs during the purchase, transportation and installation of wrought iron gates, and it is handled with care and lightness, and hard objects do not often appear where they are placed. If you determine the location of the installation, you cannot change it. In addition, the wall surface to be installed must be flat, so that it will be installed smoothly and its service life will be guaranteed.

2. Keep clean

Always clean the wrought iron gates. The rag material needs to be pure cotton knit. For dents and grime in the embossed ornament, it is recommended to use fine wool and avoid using a hard cloth to wipe.

3. can not touch the acid and alkali

It can be said that the enemies of wrought iron gates are [acid and alkali" substances. However, when encountering acids and alkalis, such as vinegar, soapy water, and soda, they should be rinsed immediately and then dried with a dry cotton cloth. If you allow these substances to stay on it for too long, the gloss of the wrought iron door surface will be greatly reduced.

4.Keep dry

As we all know, wet and easy to make metal rust, use less time. Therefore, the wrought iron gate is best installed in the ventilation area and has a long service life.

5. Timely rust removal

When the wrought iron gate is rusted, for some rust-less and shallow, it can be smeared with cotton and oil, and for a short period of time, the cloth can be wiped clean. However, if the rust is enlarged and seriously evolved, it is recommended that professional technicians be required to repair it, or ask the manufacturer to do relevant treatment after sales, and do not act rashly.